Netcomm NF4V VDSL Setup Guide

From ExeWiki
Jump to: navigation, search


ADSL setup guide for Netcomm NF4V

  • NF4v01.jpg


How to Log in to the Modem

  • 1. Open any web browser on the computer
  • 2. Type the below address as follows on the address bar of the web browser

Modem interface login address: 192.168.20.1

  • NF4v02.jpg
  • 3. Once the above address is being typed on the address bar press enter
  • 4. Then the below window will open prompting for a Username and a Password requesting authentication to log into the modem’s interface
  • 5. The username and the password which need to be added into the above box is below as follows
Username: admin 
Password: admin
  • 6. Once logged into the modem’s interface proceed with the below steps

VDSL Configuration

NF4vVDSL01.jpg

  • Please click on “Basic Setup” from the options listed

PPPoe with no VLAN.PNG

  • Then select the “Quick Setup”
  • Once prompted to the above screen select the “VDSL” mode and click the next button on the far right

NF4vVDSL03.jpg

  • In the following screen please enter the details which Exetel have provided in the initial email sent when your service is activated.
Username: *********@nsw.exetel.com.au
Password: ***********
  • Once the details have been entered to the relevant field please click the “finish” button and this completes the VDSL setup process.