Steps to configure ZTE H268A

From ExeWiki
Jump to: navigation, search
Steps to configure ZTE H268A


Step 1 : Connecting a client to the modem.


== Connecting a client via Ethernet cable ==


▪ 1. Connect the yellow Ethernet cable provided to one of the ports marked ‘LAN’ at the back of the H268A.

▪ 2. Connect the other end of the yellow Ethernet cable to your computer.

▪ 3. Wait approximately 30 seconds for the connection to establish.

▪ 4. Open your Web browser, and enter http://192.168.20.1 into the address bar and press enter.

▪ 5. Enter the default router logins to go in to the modem interface page:

Image 1.png

Username- admin

Password- admin

▪ 6. Follow the steps to set up your ZTE-H268A.


== Connecting a client via WiFi ==


▪ 1. Ensure WiFi is enabled on your device (e.g. computer/laptop/smartphone).

▪ 2. Scan for wireless networks in your area and connect to the network name that matches the Wireless network name configured on the H268A. Note: Refer to the included Wireless Security Card for the default SSID and wireless security key of your H268A

▪ 3. When prompted for your wireless security settings, enter the Wireless security key configured on the H268A.

▪ 4. Wait approximately 30 seconds for the connection to establish.

▪ 5. Open your Web browser, and enter http://192.168.20.1 into the address bar and press Enter.

▪ 6. Enter the default router logins to go in to the modem interface page:


Image 1.png

Username- admin

Password- admin

▪ 7. Follow the steps to set up your H268A for VoIP.


Steps to configure ZTE H268A for VoIP:

1. Select "VoIP" from top menu

Configure ZTE H268A 3.png

2. Select “Basic” from the left-hand side menu which will take you to below page.

3. Fill in the fields as advised below.

Configure ZTE H268A 4.png


4. Click on “Apply”

5. To verify other settings, click on “SIP Protocol” option on left-hand side menu. Please make sure the fields are filled as per below guidelines.

• Local port : 5060

• Primary proxy server : sip1.exetel.com.au

• Primary outbound proxy server : sip1.exetel.com.au

• Primary proxy port : 5060

• Secondary proxy server : 0.0.0.0

• Secondary outbound proxy server : sip1.exetel.com.au

• Secondary proxy port : 5060

• Register Expires : 3600

• Unregister on reboot : off

• Link Test : Off

• Link Test Travel : 20


Configure ZTE H268A 5.PNG

6. Click “Apply”