Difference between revisions of "Billion 7402VGO"
(Created page with "<yambe:breadcrumb self="Billion 7402VGO">Category:ADSL Modem Setup Guides|ADSL Modem Setup Guides</yambe:breadcrumb> __TOC__ ==General Setup== 1) Plug your telephone line cabl...") |
|||
Line 118: | Line 118: | ||
You are now connected to Exetel!! | You are now connected to Exetel!! | ||
+ | |||
+ | |||
+ | |||
+ | [[Category:ADSL Modem Setup Guides]] |
Revision as of 11:36, 9 August 2011
General Setup
1) Plug your telephone line cable into the port that is labeled ‘ADSL’ on the back of the router
2) Using an Ethernet (network) cable, plug one end into the network port on your PC, and the other into the port labeled ‘1’ on the router
3) Connect the power adapter to the port labeled ‘PWR’, and plug the other end into your wall power point and turn it on
4) Using the switch on the back of the modem, turn it on
Connecting to your router
5) On your PC, open a web browser and in the address bar type ‘192.168.1.254’, and press enter
6) A pop up will appear asking for your username and password – enter ‘admin’ for both username and password and click OK
7) You should now see the setup screen for your modem
Establishing ADSL connection with EXETEL
8) Click on the ‘Quick Start’ link on the left side of the page
9) In this page, enter the following information:
Encapsulation: PPPoE
VPI: 8
VCI: 35
NAT: Enable
IP Address: 0.0.0.0
Subnet Mask: 255.255.255.255
Default Gateway: 0.0.0.0
Obtain DNS Automatically: TICKED
Username: Your Exetel Username
Password: Your Exetel Password
NOTE: Username is in the format <telephone Number>@<state>.exetel.com.au . EG, if your telephone number is 0893001111 (include your area code), and you live in WA, the username is 0893001111@wa.exetel.com.au
The password is in the format <telephone number><first 2 letters of your street name, in capitals>. EG, if your number is 0893001111 and you live at 20 Main St Perth, your password would be 0893001111MA
10) Click on the Apply button
11) Click on OK
12) Click on Save Config
13) Click on Apply
14) Click on OK (Note: This message takes around 30s to pop up)
15) Click on Status (on the left of the screen)
16) In the status screen, you should see ‘Connection established’ for the PPoE Connection.
You are now connected to Exetel!!