Billion 7402VGO

From ExeWiki
Jump to: navigation, search
ADSL > ADSL Modem Setup Guides > Billion 7402VGO


General Setup

1) Plug your telephone line cable into the port that is labeled ‘ADSL’ on the back of the router

2) Using an Ethernet (network) cable, plug one end into the network port on your PC, and the other into the port labeled ‘1’ on the router

3) Connect the power adapter to the port labeled ‘PWR’, and plug the other end into your wall power point and turn it on

4) Using the switch on the back of the modem, turn it on


Connecting to your router

5) On your PC, open a web browser and in the address bar type ‘192.168.1.254’, and press enter


7402VGO-1.JPG


6) A pop up will appear asking for your username and password – enter ‘admin’ for both username and password and click OK


7402VGO-2.JPG


7) You should now see the setup screen for your modem


7402VGO-3.JPG



Establishing ADSL connection with EXETEL

8) Click on the ‘Quick Start’ link on the left side of the page


7402VGO-4.JPG


9) In this page, enter the following information:

Encapsulation: PPPoE

VPI: 8

VCI: 35

NAT: Enable

IP Address: 0.0.0.0

Subnet Mask: 255.255.255.255

Default Gateway: 0.0.0.0

Obtain DNS Automatically: TICKED

Username: Your Exetel Username

Password: Your Exetel Password

NOTE: Username is in the format <telephone Number>@<state>.exetel.com.au . EG, if your telephone number is 0893001111 (include your area code), and you live in WA, the username is 0893001111@wa.exetel.com.au

The password is in the format <telephone number><first 2 letters of your street name, in capitals>. EG, if your number is 0893001111 and you live at 20 Main St Perth, your password would be 0893001111MA


7402VGO-5.JPG


10) Click on the Apply button


7402VGO-6.JPG


11) Click on OK


7402VGO-7.JPG


12) Click on Save Config


7402VGO-8.JPG


13) Click on Apply


7402VGO-9.JPG


14) Click on OK (Note: This message takes around 30s to pop up)


7402VGO-10.JPG


15) Click on Status (on the left of the screen)


7402VGO-11.JPG


16) In the status screen, you should see ‘Connection established’ for the PPoE Connection.


7402VGO-12.JPG


You are now connected to Exetel!!