Billion BiPAC 7402VGP

From ExeWiki
Revision as of 03:21, 10 August 2011 by Bhagyam (talk | contribs)
Jump to: navigation, search
ADSL > ADSL Modem Setup Guides > Billion BiPAC 7402VGP


7402VGP1.jpg

Billion BiPAC 7402VGP - ADSL Basic Setup

1. Connect the phone line to the ADSL port (7) on the back of the modem

2. Connect the LAN cable from your computer to one of the LAN port (4) on the back of the modem, either port 1, 2 or 3


7402VGP2.jpg


3. Open your web browser and type http://192.168.1.254 in the browser’s address bar.

4. Wait for the Authentication dialog box to appear

Enter “admin” as the username

Enter “admin” as the password

5. Click OK

6. Click "Quick Start" on the left hand side panel

7. Enter the following settings on the panel on the right hand side


Connection

Encapsulation: Select "PPPoA"

VPI: 8

VCI: 35

NAT: Select Enable


Optional Settings

IP Address: 0.0.0.0

Subnet Mask: 0.0.0.0

Default Gateway: 0.0.0.0


DNS

Obtain DNS Automatically: Tick "Enable"

Primary DNS: Leave blank

Seconary DNS: Leave blank


PPP

Username: Enter the username provided in the Exetel's welcome email

Example: 0298765432@vic.exetel.com.au

Password: Enter the password provided in the Exetel's welcome email.

8. Click "Apply" to save these settings

9. Click "SAVE CONFIG" to save the configuration to flash


7402VGP3.jpg


10. Click “Status” on the left hand side panel

11. Wait a minute or so, on the WAN section on the right hand side panel, you should see the PPP Connection status “Connection established”


7402VGP4.jpg