Billion BiPAC 7402VGP

From ExeWiki
Revision as of 04:44, 20 September 2013 by Stevej (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
ADSL > ADSL Modem Setup Guides > Billion BiPAC 7402VGP


Billion BiPAC 7402VGP - ADSL Basic Setup

1. Connect the phone line to the ADSL port (7) on the back of the modem

2. Connect the LAN cable from your computer to one of the LAN port (4) on the back of the modem, either port 1, 2 or 3


3. Open your web browser and type in the browser’s address bar.

4. Wait for the Authentication dialog box to appear

Enter “admin” as the username

Enter “admin” as the password

5. Click OK

6. Click "Quick Start" on the left hand side panel

7. Enter the following settings on the panel on the right hand side


Encapsulation: Select "PPPoA"

VPI: 8

VCI: 35

NAT: Select Enable

Optional Settings

IP Address:

Subnet Mask:

Default Gateway:


Obtain DNS Automatically: Tick "Enable"

Primary DNS: Leave blank

Seconary DNS: Leave blank


Username: Enter the username provided in the Exetel's welcome email


Password: Enter the password provided in the Exetel's welcome email.

8. Click "Apply" to save these settings

9. Click "SAVE CONFIG" to save the configuration to flash


10. Click “Status” on the left hand side panel

11. Wait a minute or so, on the WAN section on the right hand side panel, you should see the PPP Connection status “Connection established”