Difference between revisions of "Fibre - Support Information"

From ExeWiki
Jump to: navigation, search
Line 2: Line 2:
  
 
==Fibre Supplier and EU Responsibility==
 
==Fibre Supplier and EU Responsibility==
 +
 +
The following table provides your a list of responsibilities of Fibre supplier and End User.
 +
  
 
{| style="float: center; border: 1px #66FFCC solid;"
 
{| style="float: center; border: 1px #66FFCC solid;"
Line 22: Line 25:
  
  
===Can I use my ADSL Router for Exetel's Fibre service?===
+
===Can I use my ADSL router for Exetel's Fibre service?===
 +
 
 +
You would be able to use ADSL routers to the extent as an additional hub point to connect additional devices for the purpose of your own internal network. From the router, you can merely connect to the Ethernet.
 +
 
  
You would be able to use these devices to the extent as an additional hub point to connect additional devices for the purpose of your own internal network. From the router, you can merely connect to the Ethernet.
 
  
 
=== What type of equipment (MODEM, Filters…etc) will I need to set up the Optic Fibre service?===
 
=== What type of equipment (MODEM, Filters…etc) will I need to set up the Optic Fibre service?===
Line 33: Line 38:
  
  
=== Optical Network Terminal (ONT) ===
+
=== What is Optical Network Terminal (ONT)? ===
  
 
An ONT is used to terminate the fibre optic cable to the End User’s (EU) premises. It serves two purposes; one is to terminate the Fibre signal and two is to give the EU a usable interface with the ONT in order to use the service. It works by taking the Fibre laser light signal and converting that back to Copper signals used inside the premises in  case of the Internet, it will translate Fibre back to Ethernet.
 
An ONT is used to terminate the fibre optic cable to the End User’s (EU) premises. It serves two purposes; one is to terminate the Fibre signal and two is to give the EU a usable interface with the ONT in order to use the service. It works by taking the Fibre laser light signal and converting that back to Copper signals used inside the premises in  case of the Internet, it will translate Fibre back to Ethernet.
Line 62: Line 67:
  
  
===Power Supply Units (PSU)for Fibre Broadband Services===
+
===What are Power Supply Units (PSU)for Fibre Broadband Services?===
  
The PSU provides a 240v to 12v regulated power supply and it comes with an empty battery backup compartment.  
+
The Power Supply Units (PSU)for Fibre Broadband services provides a 240v to 12v regulated power supply and it comes with an empty battery backup compartment.  
  
  
Line 78: Line 83:
 
* While the ONT has inputs and readings for other services (Telephone/TV etc) at this time DATA is our only requirement
 
* While the ONT has inputs and readings for other services (Telephone/TV etc) at this time DATA is our only requirement
  
===Fiber Distribution Terminal (FDT)===
 
  
FDTs are the black objects where the drops that go to individual houses are connected. FDT can go on a pole or underground depending on how your utilities are delivered. Most are 4-port terminals but they do come in different sizes.  
+
 
 +
===What are Fiber Distribution Terminals (FDTs)?===
 +
 
 +
Fiber Distribution Terminals (FDTs) are the black objects where the drops that go to individual houses are connected. FDT can go on a pole or underground depending on how your utilities are delivered. Most are 4-port terminals but they do come in different sizes.  
  
  
Line 87: Line 94:
  
  
===Optical Splitters===
+
===What is an Optical Splitter?===
  
 
Optical networking system needs signals to be coupled, splitted, distributed, this requires optical splitter to achieve. Fiber optic splitter is used to split a fiber optic beam into several beams at a certain splitting ratio. It is widely used in Optical communication system. Currently this is not essential to use the fibre service.
 
Optical networking system needs signals to be coupled, splitted, distributed, this requires optical splitter to achieve. Fiber optic splitter is used to split a fiber optic beam into several beams at a certain splitting ratio. It is widely used in Optical communication system. Currently this is not essential to use the fibre service.
Line 96: Line 103:
  
  
===Battery Backup Unit (BBU)for Fibre Broadband Services===
+
===What is a Battery Backup Unit (BBU)for Fibre Broadband Services?===
  
Purpose of this is to prepare a customer for a power outage as the Fibre will go off if power is out. The customer is responsible for buying the battery pack.
+
Purpose of a Battery Backup Unit (BBU)for Fibre Broadband Services is to prepare a customer for a power outage as the Fibre will go off if power is out. The customer is responsible for buying the battery pack.
  
  
Line 105: Line 112:
  
  
===I have more than two computers at home and need to share Internet simultaneously. Can I do this with a standard Fibre MODEM comes with the service?===
+
===I have more than two computers at home and need to share internet simultaneously. Can I do this with a standard Fibre MODEM comes with the service?===
  
 
The Optical Network Terminal (ONT) located within the property by default can have up to four Ethernet ports to use for connectivity. If you cannot connect all devices directly to the unit, you can connect a wireless/LAN router to the ONT to perform this task.The wireless unit has to be purchased.
 
The Optical Network Terminal (ONT) located within the property by default can have up to four Ethernet ports to use for connectivity. If you cannot connect all devices directly to the unit, you can connect a wireless/LAN router to the ONT to perform this task.The wireless unit has to be purchased.
 +
 +
  
  
Line 113: Line 122:
  
 
===How do I configure Fibre Broadband service?===
 
===How do I configure Fibre Broadband service?===
 +
  
 
You will need to enter your username and password in to your computer or router so that you can connect to the Exetel Fibre service. The username is unique to your service, and was emailed to you at sign up. If you can't find the email, please contact our provisioning or support staff to retrieve. Configuration will depend on whether you are using a Windows computer direct to the ONT, or if you are using a router.
 
You will need to enter your username and password in to your computer or router so that you can connect to the Exetel Fibre service. The username is unique to your service, and was emailed to you at sign up. If you can't find the email, please contact our provisioning or support staff to retrieve. Configuration will depend on whether you are using a Windows computer direct to the ONT, or if you are using a router.
Line 135: Line 145:
 
If the 'DATA' light on the ONT is not steady, then it might not be activated yet, or an issue might have developed. In this instance, you need to call Exetel on (Sydney Users): (02) 8030 1000 (This is an Exetel VoIP number so Exetel VoIP users can call at no charge) (National): 1300 788 141 (This is an Exetel VoIP number so Exetel VoIP users can call at no charge) and get the support engineers to get the wholesale provider to confirm and fix the problem.
 
If the 'DATA' light on the ONT is not steady, then it might not be activated yet, or an issue might have developed. In this instance, you need to call Exetel on (Sydney Users): (02) 8030 1000 (This is an Exetel VoIP number so Exetel VoIP users can call at no charge) (National): 1300 788 141 (This is an Exetel VoIP number so Exetel VoIP users can call at no charge) and get the support engineers to get the wholesale provider to confirm and fix the problem.
  
===Some Things To Consider Before Your Fibre Broadband Service is Activated===
+
 
 +
 
 +
===What should I do before Fibre service is activated?===
  
 
* Please ensure you have clear instructions on how to set up the router, this particularly applies if you are intending to use a second hand router.
 
* Please ensure you have clear instructions on how to set up the router, this particularly applies if you are intending to use a second hand router.
Line 141: Line 153:
 
* Additional information on setting up modems can be found on the Exetel Forum by clicking here, or on the Exetel Wiki, here.
 
* Additional information on setting up modems can be found on the Exetel Forum by clicking here, or on the Exetel Wiki, here.
 
* If you think you will need on site assistance to set up your router or your network there are a number of Exetel agents who are experienced in installing Exetel services. These organizations charge for their services but if you need assistance please call one of these companies for a quote on what they will charge you to assist you connecting to the service.
 
* If you think you will need on site assistance to set up your router or your network there are a number of Exetel agents who are experienced in installing Exetel services. These organizations charge for their services but if you need assistance please call one of these companies for a quote on what they will charge you to assist you connecting to the service.
 +
 +
 +
  
 
== Ports/ IP Addresses ==
 
== Ports/ IP Addresses ==
Line 159: Line 174:
 
=== Can I get a static IP address with fibre broadband services? ===
 
=== Can I get a static IP address with fibre broadband services? ===
  
Yes, you can get a static IP address
+
Yes, you can get a static IP address with fibre broadband services
  
  
Line 168: Line 183:
  
 
You cannot make your connection work with DHCP just by changing your router's settings. Also, upgrading your router's firmware will not help. eXeTeL would need to update equipment on its end to allow DHCP.
 
You cannot make your connection work with DHCP just by changing your router's settings. Also, upgrading your router's firmware will not help. eXeTeL would need to update equipment on its end to allow DHCP.
 +
 +
 +
  
 
==Speed Issues==
 
==Speed Issues==
  
  
=== How to run a speed test for Fibre? ===
+
=== How could I  run a speed test for Fibre? ===
  
The best way to obtain or test an Internet connection for speed problems is to connect a PC directly to the ONT via an Ethernet cable. If the ONT is connected to a wireless router this may cause the Internet to run slow as Ethernet has faster transferring rate.
+
The best way to obtain or test an internet connection for speed problems is to connect a PC directly to the ONT via an Ethernet cable. If the ONT is connected to a wireless router this may cause the Internet to run slow as Ethernet has faster transferring rate.
  
 
Please visit [[Speed Tests#Test 2 | Speed Tests]] page for specific instructions on Fibre Speed Tests.
 
Please visit [[Speed Tests#Test 2 | Speed Tests]] page for specific instructions on Fibre Speed Tests.
Line 182: Line 200:
  
 
[[File:Fibre14.gif]]
 
[[File:Fibre14.gif]]
 +
  
  
Line 190: Line 209:
  
  
==Fibre Broadband Connection Issues==
+
 
 +
 
 +
==What are the Fibre Broadband connection issues?==
  
  
Line 211: Line 232:
 
:*Ensure if there is a router present, it is connected correctly to the ONT. Then ensure it is configured with a PPPoE connection.
 
:*Ensure if there is a router present, it is connected correctly to the ONT. Then ensure it is configured with a PPPoE connection.
 
:*If the router fails to authenticate, you may have identified a programming issue but verify it, have the EU connect a cable directly to the computer from the ONT.
 
:*If the router fails to authenticate, you may have identified a programming issue but verify it, have the EU connect a cable directly to the computer from the ONT.
 +
 +
 +
  
 
== Service Restoration ==
 
== Service Restoration ==
Line 217: Line 241:
 
=== How can I contact to report a fault with fibre broadband service and is there a cost for calling that number? ===
 
=== How can I contact to report a fault with fibre broadband service and is there a cost for calling that number? ===
  
You could call the eXeTeL Support Team and they register your issue and will guide you through a series of troubleshooting steps to resolve the issue.
+
You could call the Exetel Support Team and they register the fault with your fibre broadband service and will guide you through a series of troubleshooting steps to resolve the issue.
  
  
Line 223: Line 247:
 
=== How long does it take for the restoration if my fibre broadband service goes down? ===
 
=== How long does it take for the restoration if my fibre broadband service goes down? ===
 
   
 
   
Once a service issue has been identified our aim is to rectify the issue within 24 hours upon being logged. Should physical work be required then this can take up to 5 working days depending on the extent of the problem.
+
Once a fibre service issue has been identified our aim is to rectify the issue within 24 hours upon being logged. Should physical work be required then this can take up to 5 working days depending on the extent of the problem.
  
 
[[Category:Fibre Broadband]]
 
[[Category:Fibre Broadband]]

Revision as of 06:18, 27 March 2012

Fibre Broadband > Fibre - Support Information


Fibre Supplier and EU Responsibility

The following table provides your a list of responsibilities of Fibre supplier and End User.


Accountability Type of fault Resolution
Supplier
  • Power Supply Unit (PSU)
  • Optical Network Terminal (ONT)
  • Drop cable down
  • Street network down
  • Backbone network
  • Switch components
Supplier will dispatch the required workforce to resolve these issues
End User
  • Battery backup failure
  • End user power outage
  • Street power outage
  • Internal wiring
  • Damage to NBN infrastructure (NTU, PSU, Drop cable...etc)
  • In premise gateway


MODEM and other Hardware for Fibre

Can I use my ADSL router for Exetel's Fibre service?

You would be able to use ADSL routers to the extent as an additional hub point to connect additional devices for the purpose of your own internal network. From the router, you can merely connect to the Ethernet.


What type of equipment (MODEM, Filters…etc) will I need to set up the Optic Fibre service?

Customer does not need any equipment except a direct connection to the Internet. The ONT (Optical Network Terminal) provided by our supplier has an Ethernet Port to directly connect to the Internet. To manage their Internal network, a customer will need to source a router that has both a WAN and LAN port(s). ADSL2 MODEM/Routers will not work for the purpose of connecting more than one PC through to the ONT.


What is Optical Network Terminal (ONT)?

An ONT is used to terminate the fibre optic cable to the End User’s (EU) premises. It serves two purposes; one is to terminate the Fibre signal and two is to give the EU a usable interface with the ONT in order to use the service. It works by taking the Fibre laser light signal and converting that back to Copper signals used inside the premises in case of the Internet, it will translate Fibre back to Ethernet.

Fibre faults follow the same process as our current ADSL faults. You must first validate the fault as being of the supplier network, you can do this depending on the type of fault, using the lights on the ONT or having the EU perform testing to demonstrate the fault.

The DATA light on the ONT should come on when a successful authentication attempt is done. Testing the other DATA ports will assist in verifying a faulty ONT port .


The ONT provided by NEC contains;

  • 4 10/100 Base –T Ethernet Ports
  • 2 POTS services for Voice
  • One Analog Video port for TV


Fibre9.gif


Fibre10.gif


  • Every ONT must have its own PSU
  • A BBU is a Battery Back Up that can optionally be installed during activation
  • The Customer will need to find their own Battery
  • Data port 1 is the general assumption for the service delivery point on the ONT


What are Power Supply Units (PSU)for Fibre Broadband Services?

The Power Supply Units (PSU)for Fibre Broadband services provides a 240v to 12v regulated power supply and it comes with an empty battery backup compartment.


Fibre11.gif


Fibre12.gif Typical configuration of ONT and PSU install


  • It is always recommended to have a router Gateway between the ONT and PC/Devices
  • It should only be directly connected during testing as per troubleshooting
  • While the ONT has inputs and readings for other services (Telephone/TV etc) at this time DATA is our only requirement


What are Fiber Distribution Terminals (FDTs)?

Fiber Distribution Terminals (FDTs) are the black objects where the drops that go to individual houses are connected. FDT can go on a pole or underground depending on how your utilities are delivered. Most are 4-port terminals but they do come in different sizes.


AerialFDT.gif


What is an Optical Splitter?

Optical networking system needs signals to be coupled, splitted, distributed, this requires optical splitter to achieve. Fiber optic splitter is used to split a fiber optic beam into several beams at a certain splitting ratio. It is widely used in Optical communication system. Currently this is not essential to use the fibre service.


OS.gif


What is a Battery Backup Unit (BBU)for Fibre Broadband Services?

Purpose of a Battery Backup Unit (BBU)for Fibre Broadband Services is to prepare a customer for a power outage as the Fibre will go off if power is out. The customer is responsible for buying the battery pack.


BBP.gif


I have more than two computers at home and need to share internet simultaneously. Can I do this with a standard Fibre MODEM comes with the service?

The Optical Network Terminal (ONT) located within the property by default can have up to four Ethernet ports to use for connectivity. If you cannot connect all devices directly to the unit, you can connect a wireless/LAN router to the ONT to perform this task.The wireless unit has to be purchased.



Connection Information

How do I configure Fibre Broadband service?

You will need to enter your username and password in to your computer or router so that you can connect to the Exetel Fibre service. The username is unique to your service, and was emailed to you at sign up. If you can't find the email, please contact our provisioning or support staff to retrieve. Configuration will depend on whether you are using a Windows computer direct to the ONT, or if you are using a router.

The connection related details are below:

  • Username: As provided in email.
  • Password: As provided in email.
  • Connection Type: PPPoE LLC.
  • VPI: 8
  • VCI: 35.
  • DNS Servers: 220.233.0.3 and 220.233.0.4


If you are using a router provided by Exetel you should have received it before your service was activated. Whether or not you are sourcing your router from Exetel you will have received an email with your user name and password and other set up information.

If you require more detailed assistance you should get that from the manual that comes with your router or a knowledgeable friend. Some guidance is provided on either the Exetel User Help Forum or our Wiki. It is very straight forward to set up most residential routers but if none of these aids is sufficient you will need to pay for a computer professional to assist you complete this task.

Exetel has agents in every capital city of Australia, and many regional areas. If you need help you might consider calling one of these agents who will charge you to install your fibre connection. Search for an agent


If the 'DATA' light on the ONT is not steady, then it might not be activated yet, or an issue might have developed. In this instance, you need to call Exetel on (Sydney Users): (02) 8030 1000 (This is an Exetel VoIP number so Exetel VoIP users can call at no charge) (National): 1300 788 141 (This is an Exetel VoIP number so Exetel VoIP users can call at no charge) and get the support engineers to get the wholesale provider to confirm and fix the problem.


What should I do before Fibre service is activated?

  • Please ensure you have clear instructions on how to set up the router, this particularly applies if you are intending to use a second hand router.
  • If you are thinking of using a second hand router get as much information from the person from whom you sourced it as possible including the installation CD and the web site location for the firmware updates and drivers.
  • Additional information on setting up modems can be found on the Exetel Forum by clicking here, or on the Exetel Wiki, here.
  • If you think you will need on site assistance to set up your router or your network there are a number of Exetel agents who are experienced in installing Exetel services. These organizations charge for their services but if you need assistance please call one of these companies for a quote on what they will charge you to assist you connecting to the service.



Ports/ IP Addresses

What ports have you blocked?

We do not block any ports


What about Port 80 - is it blocked?

No, port 80 is not blocked.


Can I get a static IP address with fibre broadband services?

Yes, you can get a static IP address with fibre broadband services


How can I tell if my Fibre broadband service can use DHCP instead of PPPoE?

The ONT at a customer location has nothing to do with DHCP. It is the gateway router on eXeTeL 's end that hands out Internet connections either DHCP or PPPoE.

You cannot make your connection work with DHCP just by changing your router's settings. Also, upgrading your router's firmware will not help. eXeTeL would need to update equipment on its end to allow DHCP.



Speed Issues

How could I run a speed test for Fibre?

The best way to obtain or test an internet connection for speed problems is to connect a PC directly to the ONT via an Ethernet cable. If the ONT is connected to a wireless router this may cause the Internet to run slow as Ethernet has faster transferring rate.

Please visit Speed Tests page for specific instructions on Fibre Speed Tests.

The following information is required to be answered by support personnel; you can assist by doing the following check points and providing this information:


Fibre14.gif



Where can I test the speed of my Fibre Optic service?

Visit www.ozspeedtest.com or www.speedtest.net to test speed of your Fibre service.



What are the Fibre Broadband connection issues?

  • Ensure if there is a router present, it is connected correctly to the ONT. Then ensure it is configured with a PPPoE connection (The PPPoE connection needs to be configured via computer)
  • If the router fails to authenticate, this may be due to a programming issue with the supplier. However the computer is required to be first connected directly to the ONT to determine that there are no issues with the router.


Fibre13.gif

If the problem persists contact Exetel to get a case logged to the supplier.


  • No Sync
  • There is no such thing as a “No Sync” fault for Fibre, the fault would be “No Signal”.
  • The DATA light on the ONT should come on when a successful authentication attempt is done. Testing the other DATA ports will assist in verifying a faulty ONT port.
  • No Authentication
  • Ensure if there is a router present, it is connected correctly to the ONT. Then ensure it is configured with a PPPoE connection.
  • If the router fails to authenticate, you may have identified a programming issue but verify it, have the EU connect a cable directly to the computer from the ONT.



Service Restoration

How can I contact to report a fault with fibre broadband service and is there a cost for calling that number?

You could call the Exetel Support Team and they register the fault with your fibre broadband service and will guide you through a series of troubleshooting steps to resolve the issue.


How long does it take for the restoration if my fibre broadband service goes down?

Once a fibre service issue has been identified our aim is to rectify the issue within 24 hours upon being logged. Should physical work be required then this can take up to 5 working days depending on the extent of the problem.