Netcomm - NF10WV & NF4V User Guide - Fibre Broadband

From ExeWiki
Jump to: navigation, search


Connecting the NF10WV & NF4V modem For a FTTP service

Connecting a client via Ethernet cable

1. Connect the yellow Ethernet cable provided to one of the ports marked ‘LAN’ at the back of the NF10WV or NF4V.
2. Connect the other end of the yellow Ethernet cable to your computer.
3. Connect the WAN port of the modem and the relevant Port (e.g. UNID, LAN, ETH etc) on the NTD (e.g. Fiber box, NBN Box, Opticomm box etc) with a Ethernet cable
4. Wait approximately 30 seconds for the connection to establish.
5. Open your Web browser, and enter http://192.168.20.1 into the address bar and press enter.
6. Enter the default router logins to go in to the modem interface page:
 Username- admin
 Password- admin
7. Follow the steps to set up your NF10WV or NF4V.

Connecting a client via Wi-Fi

1. Ensure WiFi is enabled on your device (e.g. computer/laptop/smartphone).
2. Scan for wireless networks in your area and connect to the network name that matches the Wireless network name configured on the NF10WV or NF4V.
 Note: Refer to the included Wireless Security Card for the default SSID and wireless security key of your NF10WV or NF4V.
3. When prompted for your wireless security settings, enter the Wireless security key configured on the NF10WV or NF4V.
4. Wait approximately 30 seconds for the connection to establish.
5. Open your Web browser, and enter http://192.168.20.1 into the address bar and press Enter.
6. Enter the default router logins to go in to the modem interface page:
 Username- admin
 Password- admin

7. Follow the steps to set up your NF10WV or NF4V.


Setting up the NF10WV/NF4V modem for FIBRE FTTP Once you have logged into the Modem interface, click on ‘Basic Setup’ and follow the steps as shown in the illustrations below:


Step 1 Step1.PNG


Step 2 Step2.PNG

Step 3 Step3.PNG


Click Finish to save the settings.

Your Internet service Should come online Once Finish is selected.

 Please refer Following Tutorials to Get your VoIP service configured for the Netcomm NF10WV & NF4V
 Link NF10WV	:	http://exewiki.exetel.com.au/index.php?title=Netcomm_NF10WV_VoIP_Setup_Guide
 Link NF4V    	:	http://exewiki.exetel.com.au/index.php?title=Netcomm_NF4V_VoIP_Setup_Guide