Difference between revisions of "Netcomm NF10W/V VDSL Setup Guide"
Line 21: | Line 21: | ||
*1. Ensure WiFi is enabled on your device (e.g. computer/laptop/smartphone). | *1. Ensure WiFi is enabled on your device (e.g. computer/laptop/smartphone). | ||
*2. Scan for wireless networks in your area and connect to the network name that matches the Wireless network name configured on the NF10WV. | *2. Scan for wireless networks in your area and connect to the network name that matches the Wireless network name configured on the NF10WV. | ||
− | Note: Refer to the included Wireless Security Card for the default SSID and wireless security key of your NF10WV | + | ''Note: Refer to the included Wireless Security Card for the default SSID and wireless security key of your NF10WV'' |
*3. When prompted for your wireless security settings, enter the Wireless security key configured on the NF10WV. | *3. When prompted for your wireless security settings, enter the Wireless security key configured on the NF10WV. | ||
*4. Wait approximately 30 seconds for the connection to establish. | *4. Wait approximately 30 seconds for the connection to establish. |
Latest revision as of 05:14, 16 May 2016
Connecting the VDSL NF10WV modem to the computer
Connecting a client via Ethernet cable
- 1. Connect the yellow Ethernet cable provided to one of the ports marked ‘LAN’ at the back of the NF10WV.
- 2. Connect the other end of the yellow Ethernet cable to your computer.
- 3. Wait approximately 30 seconds for the connection to establish.
- 4. Open your Web browser, and enter http://192.168.20.1 into the address bar and press enter.
- 5. Enter the default router logins to go in to the modem interface page:
Username- admin Password- admin
- 6. Follow the steps to set up your NF10WV.
Connecting a client via Wi-Fi
- 1. Ensure WiFi is enabled on your device (e.g. computer/laptop/smartphone).
- 2. Scan for wireless networks in your area and connect to the network name that matches the Wireless network name configured on the NF10WV.
Note: Refer to the included Wireless Security Card for the default SSID and wireless security key of your NF10WV
- 3. When prompted for your wireless security settings, enter the Wireless security key configured on the NF10WV.
- 4. Wait approximately 30 seconds for the connection to establish.
- 5. Open your Web browser, and enter http://192.168.20.1 into the address bar and press Enter.
- 6. Enter the default router logins to go in to the modem interface page:
Username- admin Password- admin
- 7. Follow the steps to set up your NF10WV.
Setting up the VDSL NF10WV modem for FIBRE FTTN/B Once you have logged into the Modem interface, click on ‘Basic Setup’ --> then click on ‘Quick Setup’ and follow the steps as shown in the illustrations below:
Click Finish to save the settings.