|
|
Line 1: |
Line 1: |
− | Step 1 : Connecting a client to the modem.
| |
| | | |
− |
| |
− | '''== Connecting a client via Ethernet cable =='''
| |
− |
| |
− |
| |
− | ▪ 1. Connect the yellow Ethernet cable provided to one of the ports marked ‘LAN’ at the back of the H268A.
| |
− |
| |
− | ▪ 2. Connect the other end of the yellow Ethernet cable to your computer.
| |
− |
| |
− | ▪ 3. Wait approximately 30 seconds for the connection to establish.
| |
− |
| |
− | ▪ 4. Open your Web browser, and enter http://192.168.20.1 into the address bar and press enter.
| |
− |
| |
− | ▪ 5. Enter the default router logins to go in to the modem interface page:
| |
− |
| |
− | [[File:Image 1.png]]
| |
− |
| |
− | Username- admin
| |
− |
| |
− | Password- admin
| |
− |
| |
− | ▪ 6. Follow the steps to set up your ZTE-H268A.
| |
− |
| |
− |
| |
− | '''== Connecting a client via WiFi =='''
| |
− |
| |
− |
| |
− | ▪ 1. Ensure WiFi is enabled on your device (e.g. computer/laptop/smartphone).
| |
− |
| |
− | ▪ 2. Scan for wireless networks in your area and connect to the network name that matches the Wireless network name configured on the H268A.
| |
− | Note: Refer to the included Wireless Security Card for the default SSID and wireless security key of your H268A
| |
− |
| |
− | ▪ 3. When prompted for your wireless security settings, enter the Wireless security key configured on the H268A.
| |
− |
| |
− | ▪ 4. Wait approximately 30 seconds for the connection to establish.
| |
− |
| |
− | ▪ 5. Open your Web browser, and enter http://192.168.20.1 into the address bar and press Enter.
| |
− |
| |
− | ▪ 6. Enter the default router logins to go in to the modem interface page:
| |
− |
| |
− |
| |
− | [[File:Image 1.png]]
| |
− |
| |
− | Username- admin
| |
− |
| |
− | Password- admin
| |
− |
| |
− | ▪ 7. Follow the steps to set up your H268A for VoIP.
| |
− |
| |
− |
| |
− |
| |
− | == '''Steps to configure ZTE H268A for VoIP:''' ==
| |
− |
| |
− |
| |
− |
| |
− |
| |
− | 1. Select "VoIP" from top menu
| |
− |
| |
− | [[File:Configure ZTE H268A 3.png]]
| |
− |
| |
− | 2. Select “Basic” from the left-hand side menu which will take you to below page.
| |
− |
| |
− | 3. Fill in the fields as advised below.
| |
− |
| |
− | [[File:Configure ZTE H268A 4.png]]
| |
− |
| |
− |
| |
− |
| |
− | 4. Click on “Apply”
| |
− |
| |
− | 5. To verify other settings, click on “SIP Protocol” option on left-hand side menu. Please make sure the fields are filled as per below guidelines.
| |
− |
| |
− | • Local port : 5060
| |
− |
| |
− | • Primary proxy server : sip1.exetel.com.au
| |
− |
| |
− | • Primary outbound proxy server : sip1.exetel.com.au
| |
− |
| |
− | • Primary proxy port : 5060
| |
− |
| |
− | • Secondary proxy server : 0.0.0.0
| |
− |
| |
− | • Secondary outbound proxy server : sip1.exetel.com.au
| |
− |
| |
− | • Secondary proxy port : 5060
| |
− |
| |
− | • Register Expires : 3600
| |
− |
| |
− | • Unregister on reboot : off
| |
− |
| |
− | • Link Test : Off
| |
− |
| |
− | • Link Test Travel : 20
| |
− |
| |
− |
| |
− | [[File:Configure ZTE H268A 5.PNG]]
| |
− |
| |
− | 6. Click “Apply”
| |
− |
| |
− |
| |
− | [[Category:VoIP]]
| |
− | [[Category:VoIP Setup Guides|VoIP MODEM Setup Guides]]
| |