ADSL1 Product Information

Description

What is ADSL?

ADSL stands for Asymmetric Digital Subscriber Line, which is an internet connection that runs over the copper telephone line cables. An active fully working telephone line is required via a Telstra equipment line (The telephone line could be leased by a Telco but their supplier needs to be via Telstra) in order to obtain the ADSL service.

ADSL 1 vs ADSL 2

What are the differences between ADSL 1 and ADSL 2?

Apart from the obvious difference in speed, there are some other significant differences between the ADSL 1 and ADSL 2. Please visit From ADSL1 to ADSL 2 - What to Expect for more information.

ADSL 1 Speed

What are the available speeds for ADSL 1?

256 kbps Down/64 kbps, 512 kbps Down/128 kbps, 1500 kbps Down/256 kbps, up to 8192kbps Down/384 kbps

What speeds can be expected on the ADSL 1 8MB service?

The speeds will vary depending solely on the distant from the exchange, quality of the copper, the copper length and age of the copper. Not all customers will be able to get the maximum theoretical 8192/384 ADSL1 line speed. The speed should be reaching 1200kbps as the minimum, if this is the case it is likely the connection is far away from the local exchange.

Does the ADSL 1 speed depends on the distance from the exchange?

Distant only matters for the 8000kbps/386kbps connections and ADSL 2 connections. All the other ADSL 1 speeds are unaffected.

Is dial up connection quicker than the ADSL 1 connection?

No.

Are P2P speeds guaranteed?

No, as this is a third party application eXeTeL holds no control over on what speeds you would be achieving.

Applying for ADSL 1

I am currently on a sub-exchange, am I still able to get the ADSL 1 connection?

You would be able to get ADSL 1 as the sub-exchange has the proper equipment to get ADSL 1.

Does having a complex service affect me getting ADSL 1?

No. This is not a problem.

Do I require an account number from my telephone bill to apply for ADSL 1?

No, this only applies if you port your telephone line over to eXeTeL.

I currently have a fax on the line, am I still able to use ADSL 1?

Yes you can use the fax line. However, the fax line will need to have a micro-filter.

Can I apply for a VoIP service while applying for an ADSL 1 service?

No you cannot apply for VoIP at the same time you purchase ADSL 1. Once you activate the ADSL connection you can order VoIP via the Members Facility area. Please note that the minimum requirement for VoIP is having a 512/128 ADSL connection.

Can I use the email to fax facility after purchasing the ADSL 1 service?

Yes, you can apply for the email to fax facility via the Exetel Members Facility area, after purchasing the ADSL 1 service.

==Rejection Reasons

My ADSL 1 application got rejected saying “XDSL product with another provider”

It is very likely that you might have a fault codes on the line or your previous provider failed to remove the codes even if you never had ADSL with any provider. For fault codes, call your current line rental provider to remove. Then reapply again. For outstanding DSL product with another provider, you can either do the same by calling your current line provider to remove or you may simply submit a churn / transfer application.

My application is still being rejected even if I have an active phone line with Optus / AAPT

It is very likely that your phone line provider might have connected your phone service via non-Telstra equipment or the telephone service you are using is not a standard PSTN copper line service. Contact your line provider and request to change the line to compatible Telstra Network equipment and it has to be a standard PSTN copper line service.

Rapid Transfer/ Churn

What is Rapid Transfer/Churn?

Transferring a service is moving from one ADSL 1 provider to another ADSL 1 provider in the same infrastructure. If an ADSL 1 service moves over to OPTUS ADSL 2 for example, this is not considered as a rapid transfer or churn as it is completely moving over to a different infrastructure. This explains why moving to ADSL 2 has a different time frame to complete compared to an ADSL 1 rapid transfer/churn.

I currently have ADSL 1 with Telstra, will I be able to transfer this?

Yes, you will need to submit a churn/transfer application through the eXeTeL website.

What should I do if I have transferred my service over from Telstra and still in the contract?

You need to wait until you are out of contract as your current provider may charge you for transferring away while you are in contract.

I currently have an active ADSL 1 service with another ISP. Can I churn / Transfer over to eXeTeL?

Yes, eXeTeL offer rapid transfer for ADSL 1 from another provider who uses compatible Telstra network equipment. Transferring takes approximately four business days from the ordering date.

Can I churn to eXeTeL ADSL 1 plan from my current ADSL 2 plan with another ISP?

No. You will need to cancel your current ADSL 2 service and reapply with an active telephone line under Telstra.

Would I be able to switch from ADSL 2 AAPT/Powertel to ADSL 1?

Due to changes in supplier, it is not possible to downgrade your service. If you were with another provider for ADSL 2, cancel the ADSL 2 connection first and then apply for ADSL 1.

Plan Details

What are the currently available ADSL 1 plans?

Please visit http://exetel.com.au/a_plan_pricing_new.php for new plan details.

What happens once order is placed

How can I check my ADSL 1 application status?

Once you receive the confirmation email you can then check on the 'Application Status' page of Exetel web site to see exactly how your application is progressing. http://www.exetel.com.au/a_application_status.php

What should I do after I submit the ADSL application?

There are several steps that need to be completed once you have submitted an ADSL application form to Exetel Limited. These steps can take from a few days to up to 10 working days if everything goes smoothly.

The steps that have to be taken to process your ADSL application are:

Step 1 - Exetel submits your application to the carrier

This is an automatic process that happens daily. Your online application is batched with all applications received up to 7pm each day and is sent in a file to ADSL Provisioning at the carrier.

Step 2 - Carrier administration confirms receipt of your application

Although Carrier ADSL Provisioning will receive your application within 24 hours of you submitting it there is a variable delay in the time it takes them to confirm they have received it. It is not unusual for this to take up to 4 working days.

Step 3 - Carrier administration asks carrier engineering to check for ADSL availability Step 4 - The wholesale provider’s engineering then provides a planned activation date

Currently around 90% of the applications submitted by Exetel applicants are accepted by the wholesale supplier and a date for activating the service is given; this date is generally within 7 working days of the application date. Approximately 10% of applications for ADSL service are rejected to being too far away from the exchange or because the line is not suitable and can't be made suitable.

Step 5 - If your application is rejected the screen will display the reason for rejection

If your application is rejected, please review the reason for rejection. If you require assistance understanding the rejection reason, please contact Exetel at provisioning@exetel.com.au

Step 6 - Once your ADSL activation has been done a 'completion date' will be displayed

Once the activation of your ADSL line has been confirmed by you can plug in your modem and check that the 'Link' / 'ADSL' light is solid; if it is your ADSL service has been activated correctly by the wholesale provider and you can now connect to the Internet via ADSL.

Connection to ADSL Service

If you are using a modem provided by Exetel you should have received it before your line is activated. Whether or not you are sourcing your modem from Exetel you will have received an email with your user name and password and other set up information.

If you require more detailed assistance you should get that from the manual that comes with your modem or a knowledgeable friend. Some guidance is provided on either the Exetel User Help Forum click here, our Wiki contains some modems, located here, or in the advice to be found on the left hand side of this page. It is very straight forward to set up an ADSL modem but if none of these aids is sufficient you will need to pay for a computer professional to assist you complete this task.

Exetel has agents in every capital city of Australia, and many regional areas. If you need help you might consider calling one of these agents who will charge you to install your ADSL connection. Search for an agent.

If the 'Link' or 'ADSL' light is not steady, then it might not be activated yet, or an issue might have developed. In this case (approximately 10% of all ADSL activations) you need to call Exetel and get the support engineers to get the wholesale provider to confirm and fix the problem.

Things to Consider Before Your Line is Activated

If you have multiple telephone handsets connecting to the line you are going to use for ADSL please ensure that you have bought enough line filters – one for each item on the line that is not the ADSL modem.

• Please ensure you have clear instructions on how to set up the modem, this particularly applies if you are intending to use a second hand modem.
• If you are thinking of using a second hand modem get as much information from the person from whom you sourced it as possible including the installation CD and the web site location for the firmware updates and drivers and do a practice install before your ADSL line is activated to ensure that everything actually works the way it is meant to.
• Additional information on setting up modems can be found on the Exetel Forum, or on the Exetel Wiki, by clicking here.
• If you think you will need on site assistance to set up your modem or your network there are a number of Exetel agents who are experienced in installing Exetel ADSL services. These organisations charge for their services but if you need assistance please call one of these companies for a quote on what they will charge you to assist you install your ADSL service.

http://www.exetel.com.au/agents_search.php

MODEM for ADSL 1

What is ADSL modem username and password?

Please visit ADSL Username and Password for username and password information

Where can I find ADSL modem setup guide?

Please visit ADSL Modem Setup Guides for more information.

Can I use the same old MODEM from my previous provider?

Yes, you can use any ADSL modem that suits you. However ensure that the modem is not locked to any particular network and Exetel is unable to assist if you are not using a Netcomm or Dynalink MODEM.

What MODEM is recommended for ADSL 1?

Any ADSL MODEM would work for ADSL 1 connections. However note that Exetel is unable to assist if you are not using a Netcomm or Dynalink MODEM.

How many micro-filters do I need when apply for ADSL 1?

This depends on how many telephony services you have on your telephone line. All telephony devices such as telephones and faxes required to be filtered. The modem does not need to be filtered.

Does eXeTeL assist with setting up my MODEM?

We can assist if it is either a Netcomm or a Dynalink MODEM as eXeTeL personnel are only trained with brands that we resell.Please email residentialsupport@exetel.com.au or Sydney users call 0280301000; national number 1300788141

Does eXeTeL come to my property to install the ADSL 1?

No. The MODEM will be sent out for you to set up the ADSL connection and guide you through the installation process as long as you are using Netcomm or a Dynalink MODEM.

Does eXeTeL lock the selling Netcomm and Dynalink MODEMs?

No, they can be used in any other network.

What is the warranty period for Netcomm or Dynalink MODEMs that I can purchase from eXeTeL?

These MODEMs carry a twelve months warranty.

Policies

Is there any SLA for ADSL 1?

No. There is no SLA (Service Level Agreement) on ADSL 1 services as they are residential grade connections.

Is there any SLA if I apply for ADSL 1 under a business name?

No. Even though it is registered under a business, the actual connection itself is still a residential grade service.

Can I share the Internet for ADSL 1?

Yes, you can share the Internet. But you need to network the multiple PCs by yourself.

Is there a cooling off period for ADSL 1 service?

No.

If I change the details of my telephone service such as ownership, will it affect on my ADSL connection?

Yes. Making any changes to the telephone line cause your ADSL program to be removed and the service to be disconnected.

What will happen if I do not pay my telephone bill on time?

If you have an ADSL on your telephone line and not paying the telephone bill this will cause the telephone to be disconnected. Once the telephone is disconnected, the ADSL service would also be removed by our supplier as an active phone line is required.