Difference between revisions of "Netcomm NF10W/V VDSL Setup Guide"
(Created page with "Category:ADSL Modem Setup Guides") |
|||
Line 1: | Line 1: | ||
[[Category:ADSL Modem Setup Guides]] | [[Category:ADSL Modem Setup Guides]] | ||
+ | |||
+ | |||
+ | == Connecting the VDSL NF10WV modem to the computer == | ||
+ | |||
+ | |||
+ | '''Connecting a client via Ethernet cable''' | ||
+ | |||
+ | *1. Connect the yellow Ethernet cable provided to one of the ports marked ‘LAN’ at the back of the NF10WV. | ||
+ | *2. Connect the other end of the yellow Ethernet cable to your computer. | ||
+ | *3. Wait approximately 30 seconds for the connection to establish. | ||
+ | *4. Open your Web browser, and enter http://192.168.20.1 into the address bar and press enter. | ||
+ | *5. Enter the default router logins to go in to the modem interface page: | ||
+ | Username- admin | ||
+ | Password- admin | ||
+ | *6. Follow the steps to set up your NF10WV. | ||
+ | |||
+ | |||
+ | '''Connecting a client via Wi-Fi''' | ||
+ | |||
+ | *1. Ensure WiFi is enabled on your device (e.g. computer/laptop/smartphone). | ||
+ | *2. Scan for wireless networks in your area and connect to the network name that matches the Wireless network name configured on the NF10WV. | ||
+ | Note: Refer to the included Wireless Security Card for the default SSID and wireless security key of your NF10WV | ||
+ | *3. When prompted for your wireless security settings, enter the Wireless security key configured on the NF10WV. | ||
+ | *4. Wait approximately 30 seconds for the connection to establish. | ||
+ | *5. Open your Web browser, and enter http://192.168.20.1 into the address bar and press Enter. | ||
+ | *6. Enter the default router logins to go in to the modem interface page: | ||
+ | Username- admin | ||
+ | Password- admin | ||
+ | *7. Follow the steps to set up your NF10WV. | ||
+ | |||
+ | |||
+ | |||
+ | '''Setting up the VDSL NF10WV modem for FIBRE FTTN/B''' | ||
+ | Once you have logged into the Modem interface, click on ‘'''Basic Setup'''’ --> then click on ‘'''Quick Setup'''’ and follow the steps as shown in the illustrations below: | ||
+ | *[[File:NF10wv_VDSL_01.png]] | ||
+ | |||
+ | *[[File:NF10wv_VDSL_02.png]] | ||
+ | |||
+ | *[[File:NF10wv_VDSL_03.png]] | ||
+ | |||
+ | Click '''Finish''' to save the settings. |
Revision as of 05:13, 16 May 2016
Connecting the VDSL NF10WV modem to the computer
Connecting a client via Ethernet cable
- 1. Connect the yellow Ethernet cable provided to one of the ports marked ‘LAN’ at the back of the NF10WV.
- 2. Connect the other end of the yellow Ethernet cable to your computer.
- 3. Wait approximately 30 seconds for the connection to establish.
- 4. Open your Web browser, and enter http://192.168.20.1 into the address bar and press enter.
- 5. Enter the default router logins to go in to the modem interface page:
Username- admin Password- admin
- 6. Follow the steps to set up your NF10WV.
Connecting a client via Wi-Fi
- 1. Ensure WiFi is enabled on your device (e.g. computer/laptop/smartphone).
- 2. Scan for wireless networks in your area and connect to the network name that matches the Wireless network name configured on the NF10WV.
Note: Refer to the included Wireless Security Card for the default SSID and wireless security key of your NF10WV
- 3. When prompted for your wireless security settings, enter the Wireless security key configured on the NF10WV.
- 4. Wait approximately 30 seconds for the connection to establish.
- 5. Open your Web browser, and enter http://192.168.20.1 into the address bar and press Enter.
- 6. Enter the default router logins to go in to the modem interface page:
Username- admin Password- admin
- 7. Follow the steps to set up your NF10WV.
Setting up the VDSL NF10WV modem for FIBRE FTTN/B Once you have logged into the Modem interface, click on ‘Basic Setup’ --> then click on ‘Quick Setup’ and follow the steps as shown in the illustrations below:
Click Finish to save the settings.